|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APL431 Adjustable Precision Shunt Regulator Features * * * * * * * * Precise Reference Voltage to 2.500V Guaranteed 0.5%, 1% or 2% Reference Voltage Tolerance Sink Current Capability, 1mA to 100mA Quick Turn-on Adjustable Output Voltage, VO = Vref to 20V Low Operational Cathode Current, 250A Typical 0.1 Typical Output Impedance SOT-23, SOT-23-5, SOT-89, SO-8, TO-92 and TO-92S Packages General Description The APL431 is a 3-terminal adjustable voltage reference with specified thermal stability over applicable commercial temperature ranges. Output voltage may be set to any value between Vref (2.5 V) and 20 V with two external resistors (see Figure 2). When used with an photocoupler, the APL431 is an ideal voltage reference in isolated feedback circuits for 2.5V to 12V switching-mode power supplies. This device has a typical output impedance of 0.1. Active output circuitry provides a very sharp turn-on characteristic, making the APL431 excellent replacements for zener diodes in many applications, including on-board regulation and adjustable power supplies. NC ANODE 3 1 2 NC 5 1 2 4 3 Applications * * * Linear Regulators Adjustable Power Supply Switching Power Supply 1 REF CATHODE R EF AN O D E C ATH O D E SOT-23 (Top View) SOT-23-5 (Top View) CATHODE ANODE 2 3 1 2 3 4 8 7 6 5 REF ANODE ANODE NC Symbol REF Anode Cathode REF ANODE CATHODE ANODE NC SOT-89 (Top View) SO-8 (Top View) 3 CATHODE Functional Diagram C athode 3 CATHODE 2 ANODE 2 ANODE R EF + _ 1 REF 1 REF Vref TO-92 (Top View) Anode TO-92S (Top View) ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 1 www.anpec.com.tw APL431 Ordering and Marking Information APL431 L e a d F re e C o d e H a n d lin g C o d e Tem p. Range Package C ode E le c . G ra d e E le c . G ra d e A : 0 .5 % R e fe re n c e V o lta g e T o le ra n c e B : 1 % R e fe re n c e V o lta g e T o le ra n c e C : 2 % R e fe re n c e V o lta g e T o le ra n c e Package C ode A : S O T -2 3 B : S O T -2 3 -5 D : S O T -8 9 E : T O -9 2 I : T O -9 2 S K : S O -8 Y : C h ip F o rm Tem p. Range C : 0 to 7 0 C I : -4 0 to 8 5 C H a n d lin g C o d e P B : P la s tic B a g TB : Tape & Box TR : Tape & Reel L e a d F re e C o d e L : L e a d F re e D e v ic e B l a n k : O r g in a l D e v i c e A P L 4 3 1 E /I : APL 431 XXXXX X X X X X - D a te C o d e A P L 4 3 1 A /B : 431 A P L 4 3 1 D /K : AP L431 XXXXX XXXXX - D a te C o d e Absolute Maximum Ratings Symbol VKA IK IREF JA Parameter Cathode voltage Continuous cathode current range Reference current range Thermal Resistance from Junction to Ambient in Free Air SOT-23 SOT-23-5 SOT-89 TO-92 SO-8 Ambient temperature range APL431XXC APL431XXI Junction temperature range APL431XXC APL431XXI Storage Temperature Range Lead temperature range, Ts (Soldering, 10sec) Original Device Lead Free Device Rating 20 100 3 416 357 250 250 210 0 to 70 -40 to 85 0 to 150 -40 to 150 -65 to 150 260 300 Unit V mA mA C/W TA Tj TSTG TSOL C C C C Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 2 www.anpec.com.tw APL431 Electrical Characteristics (Cont.) Symbol Parameter TA= 25C ( unless otherwise noted) APL431 Min. 2.487 2.475 2.450 Typ. 2.500 2.500 2.500 Max. 2.513 2.525 2.550 20 30 -3 -2.5 3 1 0.5 1 0.4 100 Test Conditions VKA=VREF, IK=10mA*1 Unit VREF VREF / T VREF / VKA IREF IREF/T IK(min) IK(off) |ZKA| IK APL431A APL431B APL431C VKA=VREF,IK=10mA Reference voltage T =0 to 70C*1 drift over temp. range A T A =-40 to 85C*1 IK=10mA, V KA=VREF to 10V*2 Voltage ratio (open loop gain) IK=10mA, V KA=VREF to 20V*2 IK=10mA, Reference current R 1=10k, R 2=open*2 IK=10mA, R 1=10k, Reference current drift R 2=open, T A= -40 to 85C *2 Min. cathode current VKA=VREF*1 Off-state cathode VKA= 20V, VREF= 0V *3 current VKA=VREF Dynamic impedance IK=1mA to 100mA, f 1kHz *1 Cathode current V KA=VREF+ 50mV*2 Reference voltage V mV mV/V A A mA A mA -1.5 -1.2 1.0 0.3 0.25 0.1 0.1 Notes : *1 : use Figure 1 *2 : use Figure 2 *3 : use Figure 3 Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 3 www.anpec.com.tw APL431 Test figures VIN IK VREF Vo VIN IK(off) Vo Figure 1. Test Circuit for VKA=VREF , VO=VKA=VREF Figure 3. Test Circuit for IK(off) VIN IK R1 R2 IREF VREF Vo Figure 2. Test Circuit for VKA>VREF, VO= VKA= VREFx (1+R1/R2) + IREF x R1 Application schematic 5-Volt Precision Regulator VIN Rb Vo 27.5k 0.1% 27.5k 0.1% Rb should provide cathode current large than 1mA to maintain APL431 work properly. Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 4 www.anpec.com.tw APL431 Typical Characteristics Reference Input Current vs. Temperature 2 Cathode Current vs. Cathode Voltage 800 Reference Input Current (A) 600 Cathode Current (A) 1.5 400 1 200 IK-MIN 0.5 0 0 -40 -20 0 20 40 60 80 100 -2 0 0 -1 0 1 2 3 Temperature (C) Cathode Voltage (V) Cathode Current vs. Cathode Voltage 800 Reference Voltage vs. Temperature 2.52 2.515 Cathode Current (mA) Reference Voltage (V) -1 0 1 2 3 600 2.51 2.505 2.5 2.495 2.49 2.485 2.48 2.475 400 200 0 -200 2.47 -40 -20 0 20 40 60 80 100 Cathode Voltage (V) Temperature (C) Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 5 www.anpec.com.tw APL431 Typical Characteristics (Cont.) Small-Signal Voltage Amplification vs. Frequency Small-Signal Voltage Amplification (dB) 60 6 Pulse Response Input 5 50 Input and Output Voltage (V) 40 4 30 3 Output 20 2 10 1 0 1 10 100 1000 0 3 4 5 6 7 8 9 10 11 12 13 Frequency (kHz) Time (S) Off-State Cathode Current vs. Temperature 0 .5 Ratio of Delta Reference Voltage to Delta Cathode Voltage vs. Tmperature Ratio of Delta Reference Voltage to Delta Cathode Voltage (mV/V) 0 -0 .2 5 -0 .5 -0 .7 5 -1 -1 .2 5 -1 .5 -1 .7 5 -2 -4 0 -2 0 0 20 40 60 80 100 120 Off-State Cathode Current (A) VKA=20V VREF=0 0 .4 VKA=VREF to 20V IK=10mA 0 .3 0 .2 0 .1 0 -4 0 -2 0 0 20 40 60 80 100 Temperature (C) Temperature (C) Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 6 www.anpec.com.tw APL431 Typical Characteristics (Cont.) Off State Cathode Current vs. Cathode Voltage 2500 Reference Impedance vs. Frequency 1 Off State Cathode Current (A) VREF=0 2000 Reference Impedance () IK=100mA TA=25C 1500 5 00 m 1000 3 00 m 500 2 00 m 0 -5 0 0 -5 0 5 10 15 20 25 30 1 00 m 1k 2k 5k 1 0k 2 0k 5 0k 1 00 k 2 00 k Cathode Voltage (V) Frequency (Hz) Stability Boundary Conditions 100 90 TA=25C VKA=VREF Stable VKA=3.3V Cathode Current (mA) 80 70 60 50 40 30 20 10 0 0.001 0.01 0.1 1 Load Capacitance (F) Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 7 www.anpec.com.tw APL431 Packaging Information SOT-23 D B 3 E 1 2 H S e A A1 L C Dim A A1 B C D E e H L M illim et er s M in. 1. 0 0 0. 0 0 0. 3 5 0. 1 0 2. 7 0 1. 4 0 1. 9 0 B SC 2. 4 0 0. 3 7 3. 0 0 0. 0 94 0. 0 01 5 M ax. 1. 3 0 0. 1 0 0. 5 1 0. 2 5 3. 1 0 1. 8 0 M in. 0. 0 39 0. 0 00 0. 0 14 0. 0 04 0. 1 06 0. 0 55 Inc he s M ax. 0. 0 51 0. 0 04 0. 0 20 0. 0 10 0. 1 22 0. 0 71 0. 0 75 B SC 0. 11 8 Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 8 www.anpec.com.tw APL431 Packaging Information SOT-23-5 e1 5 4 E1 E 1 2 3 e b D A2 A a L1 A1 L2 L Dim A A1 A2 D E E1 L L1 L2 N Mi ll imet er s Min . 0. 9 5 0. 0 5 0. 9 0 2. 8 2. 6 1. 5 0. 3 5 0. 2 0 BSC 0. 5 5 0 10 0 0. 7 0. 0 20 Ma x . 1. 4 5 0. 1 5 1. 3 0 3. 0 0 3. 0 0 1. 7 0 0. 5 5 Min . 0. 0 37 0. 0 02 0. 0 35 0. 11 0 0. 1 02 0. 0 59 0. 0 14 Inc hes Ma x . 0. 0 57 0. 0 06 0. 0 51 0. 11 8 0. 11 8 0. 0 67 0. 0 22 0. 0 08 B SC 0. 0 28 5 10 Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 9 www.anpec.com.tw APL431 Packaging Information SOT-89 D D1 a H 1 L B1 e e1 C B 2 3 E A a D im A B B1 C D D1 e e1 E H L M illim eters M in. 1.40 0.40 0.35 0.35 4.40 1.35 1.50 B SC 3.00 B SC 2.29 3.75 0.80 2.60 4.25 1.20 10 0.090 0.148 0.031 M ax. 1.60 0.56 0.48 0.44 4.60 1.83 M in. 0.055 0.016 0.014 0.014 0.173 0.053 Inches M ax. 0.063 0.022 0.019 0.017 0.181 0.072 0.059 BSC 0.118 B SC 0.102 0.167 0.047 10 Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 10 www.anpec.com.tw APL431 Packaging Information TO-92 3 J e e1 2 1 L1 Q A L SEATING PLANE E S D b2 b S Dim A b b2 D E e e1 J L L1 Q S Millimeters Min. Max. 4.318 5.334 0.406 0.406 4.445 3.175 2.413 1.143 3.429 12.70 1.27 2.921 2.032 2.667 0.559 0.559 5.207 4.191 2.667 1.397 Inches Min. 0.170 0.016 0.016 0.175 0.125 0.095 0.045 0.135 0.500 0.050 0 . 11 5 0.080 0.105 Max. 0.210 0.022 0.022 0.205 0.165 0.105 0.055 Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 11 www.anpec.com.tw APL431 Packaging Information SO-8 E H e1 D e2 A1 A 1 L 0.004max. Dim A A1 D E H L e1 e2 1 Mi ll im et er s Min . 1. 35 0. 10 4. 80 3. 80 5. 80 0. 40 0. 33 1. 27B S C 8 Max . 1. 75 0. 25 5. 00 4. 00 6. 20 1. 27 0. 51 Min. 0. 053 0. 004 0. 189 0. 150 0. 228 0. 016 0. 013 0.015X45 Inche s Max . 0. 069 0. 010 0. 197 0. 157 0. 244 0. 050 0. 020 0. 50B S C 8 Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 12 www.anpec.com.tw APL431 Physical Specifications Terminal Material Lead Solderability Solder-Plated Copper (Solder Material : 90/10 or 63/37 SnPb) Meets EIA Specification RSI86-91, ANSI/J-STD-002 Category 3. Reflow Condition (IR/Convection or VPR Reflow) Reference JEDEC Standard J-STD-020A APRIL 1999 temperature Peak temperature 183C Pre-heat temperature Time Classification Reflow Profiles Convection or IR/ Convection Average ramp-up rate(183C to Peak) 3C/second max. 120 seconds max Preheat temperature 125 25C) 60 - 150 seconds Temperature maintained above 183C Time within 5C of actual peak temperature 10 -20 seconds Peak temperature range 220 +5/-0C or 235 +5/-0C Ramp-down rate 6 C /second max. 6 minutes max. Time 25C to peak temperature VPR 10 C /second max. 60 seconds 215-219C or 235 +5/-0C 10 C /second max. Package Reflow Conditions pkg. thickness 2.5mm and all bgas Convection 220 +5/-0 C VPR 215-219 C IR/Convection 220 +5/-0 C pkg. thickness < 2.5mm and pkg. volume 350 mm pkg. thickness < 2.5mm and pkg. volume < 350mm Convection 235 +5/-0 C VPR 235 +5/-0 C IR/Convection 235 +5/-0 C www.anpec.com.tw Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 13 APL431 Reliability test program Test item SOLDERABILITY HOLT PCT TST ESD Latch-Up Method MIL-STD-883D-2003 MIL-STD-883D-1005.7 JESD-22-B, A102 MIL-STD-883D-1011.9 MIL-STD-883D-3015.7 JESD 78 Description 245C , 5 SEC 1000 Hrs Bias @ 125 C 168 Hrs, 100 % RH , 121C -65C ~ 150C, 200 Cycles VHBM > 2KV, VMM > 200V 10ms , Itr > 100mA Carrier Tape & Reel Dimensions t P P1 D Po E F W Bo Ao Ko D1 T2 J C A B T1 Application A 330 1 B 62 +1.5 D C 12.75+ 0.15 D1 J 2 0.5 Po T1 12.4 0.2 P1 2.0 0.1 T1 T2 2 0.2 Ao 6.4 0.1 T2 1.4 Ao 3.1 W 12 0. 3 Bo 5.2 0. 1 W 8.0+ 0.3 - 0.3 Bo 3.0 P 8 0.1 Ko E 1.750.1 t SOP- 8 F 5.5 1 1.55 +0.1 1.55+ 0.25 4.0 0.1 B 60 1.0 D 1.5 +0.1 C 12.0 D1 F0.1MIN J 2.1 0.1 0.30.013 P 4.0 Ko 1.3 E 1.75 t 0.20.03 (mm) Application A 1781 2.5 0.15 9.0 0.5 Po 4.0 P1 2.0 0.05 SOT-23 F 3.5 0.05 Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 14 www.anpec.com.tw APL431 Application A 178 1 SOT-23-5 F 3.5 0.05 Application A 178 1 SOT-89 F 5.5 0.05 B 72 1.0 D 1.5 0.1 B 70 2 D 1.5 0.1 C J T1 8.4 2 P1 T2 1.5 0.3 Ao W 8.0 0.3 Bo 3.2 0.1 W 12 + 0.3 12 - 0.1 Bo 4.5 0.1 P 4 0.1 Ko 1.4 0.1 P 8 0.1 Ko E 1.75 0.1 t 0.20.033 E 1.75 0.1 t 13.0 + 0.2 2.5 0.15 D1 1.5 0.1 C Po 4.0 0.1 J 2.0 0.1 3.15 0.1 T1 14 2 P1 2.0 0.1 T2 1.3 0.3 Ao 4.8 0.1 13.5 0.15 3 0.15 D1 1.5 0.1 Po 4.0 0.1 1.80 0.1 0.30.013 (mm) Carrier Tape & Reel Dimensions H2 H2 H2A H2 A0 M H3 W2 H4 H W1 H1 W D T2 T T1 F1F2 P1 P P2 D1 D2 L L1 40 C2 C1 B2 C0 A3 B1 B0 205 Box Dimensions A2 A1 T3 T4 330 UNIT : mm Application A0 3.18~12 C2 7.8 A1 901 D 4.00.2 H2A A2 761 D1 A3 301 D2 B0 901 B1 311 F1-F2 0.3 L B2 761 M 2.50.5 L1 2.5 MIN W 18.00.2 C0 5.8 H 160.5 P 12.70.3 W1 6.00.2 C1 3.8 H1 90.5 P1 6.350.4 W2 1 TO-92 H2 0.5 MAX P2 F1=F2 2.5+0.2 0.36~0.53 9.0 MAX -0.1 H3 H4 H5=H0+M 0.5 MAX 27.0 MAX 20.0 MAX 18.50.5 11.0 MAX T T1 T2 T3 15 T4 1.7 50.80.5 0.55 MAX 1.42 MAX 0.36~0.68 (mm) Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 15 www.anpec.com.tw APL431 Cover Tape Dimensions Application SOP- 8 SOT- 23 SOT- 23-5 SOT- 89 TO-92 Carrier Width 12 8 8 12 17.5~19 Cover Tape Width 9.3 5.3 5.3 9.3 5.0~7.0 Devices Per Reel 2500 3000 3000 1000 2000 Customer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. C.1 - Jun., 2003 16 www.anpec.com.tw |
Price & Availability of APL431 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |